Detecting Postgres SQL Injection
By Greg Sabino Mullane · Sunday, June 10, 2012
SQL injection attacks are often treated with scorn among seasoned DBAs and developers - "oh it could never happen to us!". Until it does, and then it becomes a serious matter. It can, and most likely will eventually happen to you or one of your clients. It's prudent to not just avoid them in the first place, but to be proactively looking for attacks, to know what to do when they occur, and know what steps to take after you have cleaned up the mess.
What is a SQL injection attack? Broadly speaking, it is a malicious user entering data to subvert the nature of your original query. This is almost always through a web interface, and involves an "unescaped" parameter that can be used to change the data returned or perform other database actions. The user "injects" their own SQL into your original SQL statement, changing the query from its original intent.
For example, you have a page in which the a logged-in customer can look up their orders by an order_number, a text field on a web form. The query thus looks like this in your code:
$order_id = cgi_param('order_number'); $sql = "SELECT * FROM order WHERE order_id = $order_id AND order_owner = '$username'"; $results = run_query($sql);
Because there is nothing to limit what the user enters in the order_number field, they can inject their own SQL into to the middle of your SQL query by creating a non-standard order_number such as:
This would return information on anyone's order, without checking the order_owner column, as the SQL sent to the database would become:
SELECT * FROM order WHERE order_id = <span class="i">12345 -- </span>AND order_owner = 'alice'
Much more creative (and destructive) choices are available to the attacker as well, such as:
SELECT * FROM order WHERE order_id = <span class="i">12345; UPDATE user SET admin=TRUE WHERE username = 'alice'; --</span>AND order_owner = 'alice'; SELECT * FROM order WHERE order_id = <span class="i">12345; TRUNCATE TABLE invoices; SELECT * FROM order WHERE order_id = 12345</span> AND order_owner = 'alice';
The above is a very simplistic generic-language example, but there are many ways for SQL injection attacks to work, including software out of your direct control (anything in your chain, from database driver to language to the database itself) and non-obvious angles (such as getting creative with multi-byte languages).
The correct approach to the above would be to use placeholders:
$order_id = cgi_param('order_number'); $sql = 'SELECT * FROM order WHERE order_id = ? AND order_owner = ?'; $results = run_query($sql, $order_id, $username);
So you've just detected a SQL injection attack. Don't panic! Okay, perhaps panic a little bit. The first order of business is to, as quickly as possible, disable access and prevent the attacker from doing anything else. Their next injected SQL statement could be a DROP TABLE. Do as much as is needed to stop it right away - don't worry about fixing the hole yet. Stop Apache, disable all CGI, shut down your database, whatever it takes. Yes, this will cause a loss of business for a busy site but so will that potential DROP TABLE command! Once things are disabled, start patching up the holes. If it is a well isolated, obvious fix, bring things back up. If not, look for similar code with the same problem, then bring things back up. There are now some important steps to take:
- Double check all similar code for any other problems.
- Check your logs carefully to see if this was an isolated event, or if the hole had been used before. If you are relying on SQL errors for detection, a careful attacker may have already successfully injected some SQL. See below for forensic tactics.
- Learn why this happened in the first place. Didn't update a driver? Someone just wrote some bad code? Something else? Fix it at both the immediate technical and long-term procedural level.
Detection is the most important part of this article. If someone were to start a SQL injection attack against your site right now, would you even know? How quickly?
Fortunately, SQL injection attacks almost always generate some SQL errors as the attacker tries to work around your SQL. This is the number one way to detect an attack while it is happening. We recommend the invaluable tail_n_mail for this task. For our clients, we have tail_n_mail running via cron every minute, scanning for new and interesting errors and mailing them out to us. Thus, detection is usually within minutes.
In addition to pure SQL errors, permission errors often occur as well, as the attacker tries to do something not allowed by the current database user, such as creating a table or running the COPY command. Remember to never treat a strange error as an unintersting isolated event, or assume that it is probably one of your developers making a typo. Follow up on everything.
Sometimes, when the attacker is very good, no SQL errors are generated, and the problems have to be detected in other ways. One way is to scan for common SQL injection items. The trick is filtering out valid SQL while finding injected ones. In most cases, attacker access to your database is fairly limited without knowing the names of your tables, columns, functions, and views, so one thing to look for is references to system tables such as pg_class and pg_attribute, system views such as pg_tables and pg_stat_activity, the pg_sleep() function, and the information_schema schema. (pg_sleep() is often used in "blind SQL" attacks, to let the attacker know if something worked or not by the inclusion of a delay, when there may be no other direct feedback from their injection). While looking for these items is not as easy to setup as looking for errors, it can be fairly easy to develop and exclude a whitelist of things that should be accessing those items.
Another thing to watch out for strange offsets. Because the information an attacker can get back is often limited to a row at a time due to the limitations of the original query, SQL injections often pull back the same information from, say, information_schema.tables, with a "LIMIT 1 OFFSET 1" tacked on, Then they call the page again and inject their SQL, but with an offset of 2, then an offset of 3, etc. Nothing says SQL injection like seeing an OFFSET 871 in your logs.
Speaking of logs, you may have noticed that the above checks will only work if you are logging all statements, by adjusting log_statement in your postgresql.conf file. Setting this parameter to 'all' is highly recommended, and SQL injection detection (and forensics!) are merely two of the many reasons for doing so.
If you don't have log_statement set to 'all', your only hope of direct detection is if one of the queries happens to get logged for some other reason, such as going over your log_min_duration_statement setting. Good luck with that. /sarcasm.
There are other methods of detecting SQL injection, but they can all be classified as reacting to side effects. Your logs may grow larger, a sysadmin on your team may notice some odd network patterns, your business intelligence people may come across some unexplained buying patterns, etc. Intuition from experienced people is a powerful tool: follow up on those hunches and nagging feelings!
Preventing SQL injection is mostly a matter of following some standard software development practices. Basically, you want your code up to date, well vetted, and easy to read and revert. Here are some guidelines:
Use version control
More specifically, use git. For everything related to your site. Application code, HTML pages, system configurations. There are many advantages to git, but it is particularly useful when you are (quickly!) trying to figure out how some bad code (e.g. with SQL injection holes) got into your app, and what safe version you can replace it with. The powers of git log -p, git bisect, git blame, and git checkout will make you wonder how you ever lived without them.
More than one set of eyes
Never commit code that hasn't been looked at by at least one other person not involved in its writing. This can be as informal as leaning over and asking someone else to look at the patch, to setting up a complex enforcement system via something like gerrit. The most important thing is to have it reviewed by someone qualified, and to note the review in your commit message.
Email is a great way to do this, especially if you have a list of people qualified to give a review of the code in question. So, database changes could go to a "dbgroup" list, and one or more people on the list will review and reply.
Another nice thing is a post-commit hook that mails committed code as a diff to a wide audience, such as all engineers in the company. Sure, most people may ignore it, but the more eyes the better. On that note, make sure the age-old appeal of heavily commenting code is followed, especially code that is trying to fetch information from a database.
Teach people about SQL injection
Using placeholders is the only truly safe way to write code. Make sure everyone knows this, and show some examples of SQL injection problems to new hires so they know what to look out for and what the consequences will be.
Never assume any database input is safe.
Never, ever assume database input is safe, or will remain safe. Always use prepared statements aka placeholders. You say you scrubbed that variable with a regular expression above the SQL call? Someone will tweak that regex someday.
Be proactive in looking for problems
See the section about about using tail_n_mail. There are also companies / tools that will attempt to find SQL injection problems in your application. While not foolproof, these can be useful, particularly if you have a very large website with a very large codebase.
Keep your software up to date
Sure, your software is free of all problems, but what about the framework you are using? The language? The database? And the database drivers? They may have a SQL injection problem, and, more importantly, they may have already patched it. Run the most recent version, and make sure you are on all the relevant announcement lists so you hear about new problems and new releases of everything important in your tool chain.
In these days of complex frameworks and multiple levels of abstraction, direct SQL access is often hard or impossible to do. Which can be a very good thing, as this is often a good protection against SQL injection. Keep in mind however that there are always other ways to reach your database, such as the boss's daughter or son whipping up a quick PHP script so he can run some reports from home against the production database.
Use the least privileges possible
Make sure you are taking full advantage of roles and users in your database. This means an application should have the bare minimum rights it needs to do its job. No creating of functions, no creating tables, and explicit GRANTs to the tables/views/functions it truly needs. Limit severely what runs as a superuser. If something really needs to run as a superuser, consider wrapping the data/logic in a SECURITY DEFINER function. Having separate "readonly" and "readwrite" versions of each application's user is a great idea as well, and may even help you to scale by being able to send your readonly user to a different database (via hot standby or a Bucardo/Slony slave), or even send them to different pg_bouncer ports with different pooling methods.
Access can be further limited by the use of views, which can limit which columns and rows are visible to a user, or you could even limit all application user access to going through stored procedures.
URLs are public
Never assume an application, URL, or API will remain internal. It will end up accessible to an attacker someday, somehow. Treat everything with the same careful, paranoid, care and always use placeholders.
So you've just closed a SQL injection hole, and carefully audited your code to ensure no other holes exist. Now what? Forensics! Which means, a careful examination after the crime. In this case, we want to see what damage the intruder managed to cause.
The first thing to do is figure out what potential harm there is. You can do this by assuming the worst case scenario. What database user was used in the attack, and what rights does it have? Could tables have been updated? Data deleted? Were tables dropped or views altered? This may be a good time to run something like same_schema in historical mode to find out the answer to that last question.
Now comes the hard part: seeing what was changed. If you do not have log_statment='all' set in your postgresql.conf (as I will once again highly recommend you should have) finding what has changed becomes a very, very difficult task. Your best bet at this point is to go to your backups and start comparing things, and perhaps running some sanity checks on your data (e.g. unusually low prices on things you sell, new mega-useful coupons, users with elevated rights). If you know about when the attack started, you could, in theory, look on disk to see which relations may have been altered to narrow the list of changed data. You will also have to assume that the attacker captured all the possible data the database user was allowed to see.
Enough about the worst case scenario above - what about those of us with log_statment='all'? Well, now we go through the logs to see what exact SQL was injected, and what commands have been succesfully run. At this point, you should know what the SQL involved in the attack looks like, and more to the point, where in your code it came from. Now its a matter of filtering out the good stuff from the bad. Luckily, this is a pretty easy task.
What you will need to do is write a quick script to parse your logs, find the type of query that had the hole, and determine the "bad" ones. Then you can look closer and have it report exactly what commands the attacker ran.
Most SQL injection results in a string of additional SQL in place of where a single value should be, with an adding of quotes. So, for example, if someone forgot to escape an OFFSET at the end of the query, your program could simply look for any variations of the query that ended in something other than OFFSET \d$. If the unescaped value was in the middle of the query, I find that a simple but reliable test is to look for whitespace or a '' character. This assumes that whitespace or '' would not normally appear for that value, but as long as it's not common, it should still work. (The '' is needed because one can use SQL comments as a means of whitespace, for example **SELECT///foo/FROM//pg_tables). Your script should ignore any queries in which the value has no whitespace or '*' character, and focus on the ones that do. Then normalize the queries (for example collapse ones that differ only by the OFFSET value), and generate a report. Of course, the exact method to differentiate between "good" and "bad" queries will vary. Find your best Perl hacker and set them on it.
I should point out that a script is almost always necessary, for three reasons. First, manually reading logs is a time-wasting and error-prone bore. Second, log_statment='all' leads to some really, really big logs. Third, SQL injection attacks usually involve some sort of scripted attack, which can mean a lot of entries. For example, a client recently had over 8000 lines from a SQL injection attack spread out over 20 GB of log files. (This one had a happy ending: the attacker was both not very competent and the database user was fairly locked down, so no damage was done.)
So remember: SQL injection can happen to you. Make sure you are able to detect it, recognize it, fix it, and inspect the damage!